FTIR surface analysis for conservation

Abstract

Abstract Several FTIR techniques are surface-sensitive. This sensitivity can be utilized to help with a wide range conservation issues. Examples from object degradation studies, conservation materials performance assessment and monitoring are presented. These are used to discuss the issues, advantages and information that can be drawn from studies. Glass degradation was quantified on the surfaces of cover glasses from important Nineteenth century daguerreotypes using Germanium attenuated total reflectance. The very limited information depth endowed by the high refractive index crystal gave good sensitivity when other techniques such as sectioning and scanning electron microscopy had failed to detect a gel layer present. The inner glass surface was always more deteriorated and the degree of deterioration inversely correlated with the distance between the inner glass surface and the daguerreotype or brass matt surface. Reflection–absorption FTIR microscopy has been combined with an excimer laser to determine the water content of a series of sections through the depth of a wax. A common wax used to protect metals has been found to take up liquid water in humid environments and hold that water close to or at the metal surface. An adjustable height gold mirror was used to bounce the IR beam many times across a surface, which can give extreme sensitivity. Haze and smoke generators are increasingly being introduced into displays or for special events or filming. Very low detection limits (1 ng) were found using gold coated glass slides to detect haze deposits.

Keywords

• FTIR
• ATR
• Transflection
• Wax
• Haze
• Glass