Influence of choline chloride pH adjuster on physical and optical properties of CuInSe2 thin films by CBD

Abstract

We concentrate on low-cost thin film solar cells with the help of choline chloride acting as a pH adjuster because copper ternary material compounds and their alloys have become more and more lavish over the past 20 years. Chemical Bath Deposition (CBD) is used to produce copper indium selenium (CuInSe2) thin films on glass substrates while a pH adjuster is present. The micro structural and elemental properties are studied using X-ray diffraction (XRD), Raman, Scanning Electron Microscope (SEM), and Energy Dispersive Spectroscopy (EDS). The optical studies of CuInSe2 thin films are done using a UV–Vis–NIR spectrometer. XRD and Raman spectra shows that the CIS thin films deposited in the sequence of Glass/In/Se/Cu2Se/Se (labeled as CISB) and annealed at 400 °C (CISB400) contains all the peaks corresponding to the chalcopyrite CuInSe2. From the EDS measurements it was noted that the selenium to metal ratio (Se/Cu + In) for all the samples changes with temperature. It is worth to note that the film thickness decreases with a decrease in the pH of choline chloride which results a change in the optical band gap of the films. The optical properties of these thin films are greatly influenced by adjusting pH and it gives better results for optoelectronic devices with a sustainable UV filter which absorbs more in ultraviolet vicinity. The energy gap (Eg) values of the CISB samples were determined and is found to be suitable for photovoltaic conversion process.

Keywords

• CBD
• pH
• Thin films
• Optical properties