Atmospheric Chemistry and Physics (Aug 2010)

Particle size distributions from laboratory-scale biomass fires using fast response instruments

  • S. Hosseini,
  • Q. Li,
  • D. Cocker,
  • D. Weise,
  • A. Miller,
  • M. Shrivastava,
  • J. W. Miller,
  • S. Mahalingam,
  • M. Princevac,
  • H. Jung

DOI
https://doi.org/10.5194/acp-10-8065-2010
Journal volume & issue
Vol. 10, no. 16
pp. 8065 – 8076

Abstract

Read online

Particle size distribution from biomass combustion is an important parameter as it affects air quality, climate modelling and health effects. To date, particle size distributions reported from prior studies vary not only due to difference in fuels but also difference in experimental conditions. This study aims to report characteristics of particle size distributions in well controlled repeatable lab scale biomass fires for southwestern United States fuels with focus on chaparral. The combustion laboratory at the United States Department of Agriculture-Forest Service's Fire Science Laboratory (USDA-FSL), Missoula, MT provided a repeatable combustion and dilution environment ideal for measurements. For a variety of fuels tested the major mode of particle size distribution was in the range of 29 to 52 nm, which is attributable to dilution of the fresh smoke. Comparing mass size distribution from FMPS and APS measurement 51–68% of particle mass was attributable to the particles ranging from 0.5 to 10 μm for PM<sub>10</sub>. Geometric mean diameter rapidly increased during flaming and gradually decreased during mixed and smoldering phase combustion. Most fuels produced a unimodal distribution during flaming phase and strong biomodal distribution during smoldering phase. The mode of combustion (flaming, mixed and smoldering) could be better distinguished using the slopes in MCE (Modified Combustion Efficiency) vs. geometric mean diameter than only using MCE values.