Nonlinear Vibration Analysis of Turbocharger Rotor Supported on Rolling Bearing by Modified Incremental Harmonic Balance Method

Abstract

High-speed rolling bearings exhibit low friction, high mechanical efficiency, low lubrication requirements, and excellent acceleration performance. The replacement of floating ring bearings in turbochargers with rolling bearings is an important tendency for modern turbochargers. However, due to the nonlinearity in rolling bearings, the nonlinear vibration characteristics of the turbocharger rotor system need to be clearly revealed. The turbocharger rotor is modeled by a lumped mass model. The nonlinear rolling bearing model is derived using the Hertz contact theory. The vibration responses of the nonlinear system are obtained by the modified incremental harmonic balance (MIHB) method. The results demonstrate that the MIHB method significantly improves computational efficiency compared to the traditional fourth-order Runge–Kutta method for solving this class of problems while also being capable of obtaining complete solution branches of the system. The stability of the responses is determined by the Floquet theory. Based on the present rotor dynamic model, the conical mode and cylindrical mode are found. Resonance peaks at 4.5 × 104 rpm (conical mode) and 1.1 × 105 rpm (bending mode) are identified as critical vibration thresholds. Moreover, the vibration amplitude results show that the resonance peak of the bending mode is mainly due to the nonlinearity of the rolling bearings, which also causes the amplitude jumping phenomenon. Changing the parameters of the rolling bearing could avoid the resonance peak appearing in the working speed range. The amplitude of the system under different rotating speeds could be suppressed by choosing the appropriate parameters of the rolling bearing.

Keywords

• turbocharger
• rolling bearing
• nonlinear dynamics
• rotor-bearing system
• modified incremental harmonic balance method