A new method for producing superior set yogurt, focusing on heat treatment and homogenization

Abstract

ABSTRACT: Extended shelf life (ESL) processing (i.e., heat treatment at 130°C for 2 s) is usually not used for producing set yogurt because of the fragility of the curd structure. We investigated the effects of homogenization conducted at higher pressure than the conventional conditions (10 MPa for the first stage and 5 MPa for the second stage) on the curd structure of set yogurt, with a focus on the fat globule size. Each yogurt mix was adjusted at the range of fat globule sizes from 0.45 μm to 1.1 μm by a homogenizer and then heated at 95°C for 5 min (conventional heat treatment), 120°C for 2 s, ESL processing, or 140°C for 2 s. The yogurt mixes were fermented by a common yogurt starter, and the curd texture of the obtained yogurts was evaluated. We observed that the curd hardness and curd firmness of the yogurt were each negatively correlated with the fat globule size regardless of the heat-treatment temperature. Compared with the curd obtained with conventional heat treatment, the ESL-processed curd was extremely fragile, but significantly smooth. With ESL processing, a curd hardness >40 g, which is a sufficient strength for commercial transport systems, was obtained by making the fat particle size <0.6 µm, using 2-stage homogenization pressure: 35 MPa for the first stage and 5 MPa for the second stage. A microscopy analysis indicated that the smaller fat globules reinforce the network structure. The yogurt made by ESL processing and that created with 35 + 5 MPa homogenization had significant sensory evaluation scores. Our results indicate that the combination of ESL processing and 35 + 5 MPa homogenization is a novel and useful method for manufacturing set yogurt.

Keywords

• set yogurt
• extended shelf life processing
• homogenization
• fat globule size