Elimination of Microplastics at Different Stages in Wastewater Treatment Plants

Abstract

Microplastic pollution has been widely studied as a global issue due to increased plastic usage and its effect on human and aquatic life. Microplastics originate from domestic and industrial activities. Wastewater treatment plants (WWTPs) play an important role in removing a significant amount of microplastics; otherwise, they end up in bioaccumulation. This study provides knowledge about the characteristics of microplastics, removal efficiency, and the correlation between wastewater quality and microplastic concentrations from three different WWTPs that differ in the type of biological and advanced wastewater treatment techniques that are believed to play an important role in microplastic removal. Microplastics of different types, such as fragments, fibers, and beads, are identified by using an optical microscope before and after the treatment process at each stage to assess the effect of different treatment techniques. In the screening unit and primary clarifier unit, WWTP-B shows the highest removal efficiency with 74.76% due to a distribution flow system installed before the primary clarifier to ensure a constant flow of wastewater. WWTP-B uses a bioreactor consisting of a filter plate coated with activated carbon (BSTS II) that can enhance the adaptability and adhesion of microorganisms and showed that 91.04% of the microplastic was removed. Furthermore, only WWTP-A and WWTP-B were applied coagulation, followed by the disc filter; they showed significant results in microplastic removal, compared to WWTP-C, which only used a disc filter. In conclusion, from all WWTP, WWTP-B shows good treatment series for removing microplastic in wastewater; however, WWTP-B showed a high rate of microplastic removal; unfortunately, large amounts of microplastics are still released into rivers.

Keywords

• wastewater
• microplastics
• removal
• treatment plant
• coagulation
• disc filter