Results in Physics (Sep 2024)
Yttria-doped geopolymers: Environmentally friendly and effective materials for shielding concrete in gamma radiation facilities
Abstract
The use of geopolymer in place of ordinary Portland cement for concrete design and constructure is gaining attraction due to environmental and health considerations. Geopolymers must have high gamma radiation shielding competence in order for them to be useful for radiation shielding concrete. In an attempt to improve the gamma absorption capacity of a metakaolin-based geopolymer matrix, 10 % (GEO-10Y), and 20 % (G-20Y) yttria (Y2O3) was mixed with GEO through a solid-state reaction process. In this study, the influence of adding yttria on the physical and gamma shielding parameters of GEO was investigated. The densities of GEO, GEO-10Y and GEO-20Y were obtained as 2.28, 2.52 and 2.37 g/cm3, respectively. Through simulation using FLUKA code, the mass attenuation coefficients (MAC) and other relevant shielding quantities were estimated. The MACs of GEO, GEO-10Y, and GEO-20Y were within the range of 0.0213–6.6429 cm2/g, 0.0282–13.3923 cm2/g, and 0.0291–14.5136 cm2/g, respectively. The addition of yttria improved the gamma photon shielding competence of the metakaolin-based geopolymer by increasing the MAC and reducing photon buildup factors within 15 keV–15 MeV photon energy range. The shielding effectiveness of the yttria-doped GEO compares well with conventional shielding materials. Yttria-doped geopolymer can be used to produce effective and environmentally-friendly gamma shielding concrete.