Comparative Study of the Rock-breaking Mechanism of a Disc Cutter and Wedge Tooth Cutter by Discrete Element Modelling

Abstract

Abstract The operation of a shield tunnel boring machine (TBM) in a high-strength hard rock stratum results in significant cutter damage, adversely affecting the thrust and torque of the cutter head. Therefore, it is very important to carry out the research on the stress characteristics and optimize the cutter parameters of cutters break high-strength hard rock. In this paper, the rock-breaking performance of cutters in an andesite stratum in the tunnel of Qingdao Metro Line No. 8 was investigated using the discrete element method and theoretical analysis. The rock-breaking processes of a disc cutter and wedge tooth cutter were simulated by software particle flow code PFC3D, and the rock-breaking degree, stress of the cutter, and rock-breaking specific energy were analyzed. The rock damage caused by the cutter in a specific section was divided into three stages: the advanced influence, crushing, and stabilizing stages. The rock-breaking degree and the tangential and normal forces of the wedge tooth cutter are larger than that of the disc cutter under the same conditions. The disc cutter (wedge tooth cutter) has the highest rock-breaking efficiency at a cutter spacing of 100 mm (110 mm) and a penetration depth of 8 mm (10 mm), and the rock-breaking specific energy is 11.48 MJ/m3 (12.05 MJ/m3). Therefore, two types of cutters with different penetration depths or cutter spacing should be considered. The number of teeth of wedge tooth cutters can be increased in hard strata to improve the rock-breaking efficiency of the shield. The research results provide a reference for shield cutterhead selection and cutter layout in similar projects.

Keywords

• Qingdao andesite
• Rock breaking with cutter
• Wedge tooth cutter
• Specific energy
• PFC3D