Radiation preparation of nano-oxide@microcrystalline cellulose and its adsorption and removal of trichloroacetic acid

Abstract

Trichloroacetic acid is a common nonvolatile byproduct of drinking water disinfection and poses carcinogenic risks to the human body. In this study, four types of nano-oxide@microcrystalline-cellulose-based adsorbents (P25@microcrystalline cellulose, SiO₂@microcrystalline cellulose (MCC-g-GMA@SiO2), Fe3O4@microcrystalline cellulose, and Fe2O3@microcrystalline cellulose) were successfully prepared by the pre-radiation grafting-embedding method. Subsequently, their ability to remove trichloroacetic acid from drinking water was investigated. The micro zonation morphology and surface properties of the materials were characterized and tested using Fourier transform infrared spectroscopy (FTIR), X-ray diffraction spectroscopy (XRD), Thermogravimetric (TG) analysis, and Scanning electron microscopy (SEM) characterization methods. The effects of monomer concentration, embedding concentration, and absorbed dose on the weight gain rate were systematically investigated. A complete static adsorption equilibrium curve was obtained on the basis of the results of adsorption experiments of four buried nano-oxides. The performance of SiO2@microcrystalline cellulose was found to be significantly higher than that of the other three adsorbents. When the volum percentage of monomer concentration was 30%, the mass percentage of embedding concentration was 4%, and the absorbed dose was 60 kGy, the removal rate of trichloroacetic acid in drinking water reached 83.27%. This series of adsorbent materials present significant potential for practical application in drinking water purification.

Keywords

• microcrystalline cellulose
• glycidyl methacrylate
• trichloroacetic acid
• pre-radiation grafting
• embedding
• adsorption