Effect of Coarse Aggregate and Multi-Wall Carbon Nanotubes on Heat Generation of Concrete

Abstract

Many researchers are developing heating construction materials to remove black ice from roads, addressing the scientific challenges associated with this issue. The use of carbon-based nanomaterials in concrete is of great interest due to the excellent electrical and thermal conductivity of this material. In this study, the incorporation of multi-walled carbon nanotubes (MWCNTs) into concrete compositions results in the formation of MWCNT bridge networks. MWCNTs exhibit a low specific heat and possess the ability to promptly generate raised temperatures with minimal power input. This characteristic has the potential to induce temperature variations in concrete. The heat generation test parameters for MWCNT concrete included the mixing concentration of the MWCNTs, the mixing ratio of coarse aggregate, the water/cement (W/C) ratio, and the presence or absence of superplasticizers. The heating performance of concrete was found to improve as the mixing concentration of the MWCNTs increased, while a heating performance decrease was observed as the mixing ratio of coarse aggregate increased, owing to the reduced dispersibility of the MWCNTs. Conversely, the heating performance improved when the W/C ratio increased due to the enhanced dispersibility of the MWCNTs. Moreover, superplasticizers assist in dispersing MWCNTs, thereby improving the heating performance. Additionally, field emission scanning electron microscopy revealed that MWCNTs form a bridge network between the cement hydrates. As a result of this study, the maximum temperature variation of concrete mixed with MWCNTs was up to 73.6 °C. Therefore, by mixing MWCNT aqueous solutions with concrete and using an appropriate W/C ratio and superplasticizer, a new construction material capable of enhanced heating performance was developed.

Keywords

• multi-walled carbon nanotube
• concrete
• aggregate
• heating performance