Development of the Heterodyne Laser Encoder System for the X–Y Positioning Stage

Abstract

This investigation develops a laser encoder system based on a heterodyne laser interferometer. For eliminating geometric errors, the optical structure of the proposed encoder system was carried out with the internal zero-point method. The designed structure can eliminate the geometric errors, including positioning error, straightness error, squareness error, and Abbe error of the positioning stage. The signal processing system is composed of commercial integrated circuits (ICs). The signal type of the proposed encoding system is a differential signal that is compatible with most motion control systems. The proposed encoder system is embedded in a two-dimensional positioning stage. By the experimental results of the positioning test in the measuring range of 27 mm × 27 mm, with a resolution of 15.8 nm, the maximum values of the positioning error and standard deviation are 12.64 nm and 126.4 nm, respectively, in the positioning experiments. The result shows that the proposed encoder system can fit the positioning requirements of the optoelectronic and semiconductor industries.

Keywords

• laser encoder
• heterodyne laser interferometer
• geometric error
• positioning stage