Carbon Nanotubes (CNTs) Reinforced CoCrMoNbTi_0.4 Refractory High Entropy Alloy Fabricated via Laser Additive Manufacturing: Processing Optimization, Microstructure Transformation and Mechanical Properties

Abstract

Refractory high-entropy alloys (RHEAs) exhibit outstanding softening resistance and thermal stability at elevated temperatures. Unfortunately, poor ductility at room temperature has remained the critical issue for their processability and practical application. In this study, an original-type fabrication method of RHEA was proposed, using multi-walled carbon nanotubes (MWCNTs) to enhance the alloy prepared via laser melting deposition (LMD) technology. The processing optimization, microstructure evolution and mechanical properties were systematically investigated for LMD processing of CNTs/CoCrMoNbTi0.4 RHEA. The results have shown that CNTs/CoCrMoNbTi0.4 RHEA have a polycrystalline structure (BCC, HCP, and TiC). As the optimal LMD-processing parameters of laser linear energy density of 3.6 J/mm were applied, owing to the formation of high densification and an ultrafine microstructure, the fully dense LMD-processed alloy exhibited high microhardness of 1015 HV0.5, fracture strength of 2110.5 MPa, and fracture strain of 2.39%. The solid solution strengthening and load transfer are considered as the main strengthening mechanisms occurring simultaneously during compressive tests at room temperature, leading to excellent mechanical properties of LMD-processed CNTs/CoCrMoNbTi0.4 RHEA, which explores the potential application of RHEAs.

Keywords

• carbon nanotubes (CNTs)
• refractory high entropy alloy
• laser additive manufacturing
• processing optimization
• mechanical properties