Stress–Dilatancy Behavior of Alluvial Sands

Abstract

Based on the Frictional State Concept (FSC), the stress–dilatancy behavior of alluvial sands in drained triaxial compression was investigated. The dilatant failure state is equivalent to the minimum plastic dilatancy state for sands. The dilatant failure state slightly precedes the failure state. The straight line approximating dilatant failure states in the stress ratio–plastic dilatancy plane defines the slope of the critical frictional state line in the q-p’ plane, i.e., the critical frictional state angle. The stress ratio–plastic dilatancy relationship, obtained from the FSC, defines the sand shear angle as a function of the critical frictional state angle and plastic dilatancy. The shear angle of the tested sand is a maximum of 2° greater than that obtained from Bolton’s formula. According to the authors, these differences are affected by the transverse anisotropy of sand in the tested samples and the difference between the dilatant failure state and the failure state.

Keywords

• sands
• stress–dilatancy
• shear strength
• triaxial compression