Compatibility and performance study of electrohydrodynamic printing using zinc oxide inkjet ink

Abstract

Abstract The demand for modern electronics and semiconductors has increased throughout the years, which has enabled the innovation and exploration of solution-processed deposition. Solution-based processes have gained a lot of interest due to the low-cost fabrication and the large fabrication areas without the need for high-vacuum equipment. In this study, we utilized the ZnO ink for inkjet printer ink to fabricate a thin film via Electrohydrodynamic printing. Three different ink solutions were prepared for experimentation. The EHD printing technique demonstrated the ink’s compatibility with and without the modifications. The outcomes of the EHD printed materials were comparable with the spin-coated thin films. The EHD-printed films demonstrated better results in comparison to spin-coated films. Ra and Rq of the EHD film measured at 3.651 nm and 4.973 nm, respectively. It improved the absorbance up to two-fold at 360 nm wavelength and electrical conductivity up to 40% compared to the spin-coated films. Furthermore, the optimization of the printing parameters can lead to the improved morphology and thickness of the EHD thin films.

Keywords

• Electrohydrodynamic
• EHD
• Electrospraying
• Zinc oxide
• ZnO
• Thin-films