Utilization of Oil Palm Empty Fruit Bunch (EFB) Waste as a Mixing Material for In-terlocking Brick Production

Abstract

The choice of building materials has a considerable influence on the reliability of a building. Conventional bricks, despite their frequent use, pose a challenge due to their weight, as they affect the load-bearing capacity of the building, unlike interlocking bricks, which have holes at the top and bottom for reinforcement, potentially reducing the effects of earthquakes. In this study, interlocking bricks made from a mixture of empty oil palm fruit stalks and sand with different sand replacements (0%, 2.5%, 5%, 7.5%, 10%, and 12.5%) are investigated. The research results consistently show that the average density of EFB fiber composite bricks with a density of 1.48 grams/cm³ is lower than that of standard composite bricks. Although the compressive strength of these bricks is initially lower than that of standard bricks, it increases with the substitution of part of the sand with EFB fibers, although not significantly, with the highest compressive strength observed at a substitution rate of 12.5%, reaching 5.201 MPa. Water absorption rates ranged from 13.97% to 21.99%, which increases compared to standard bricks but still meets the requirements. With ongoing research and innovation, EFB-based interlocking bricks have the potential to address environmental challenges and support sustainable and environmentally friendly building practices.

Keywords

• Interlocking bricks
• Oil Palm Empty Fruit Bunch Fibers (EFB fibers)
• Compressive strength
• Water absorption