Research on a Wire Rope Breakage Detection Device for High-Speed Operation Based on the Multistage Excitation Principle

Abstract

Wire rope breakage, as damage easily produced during the service period of wire rope, is an important factor affecting the safe operation of elevators. Especially in the high-speed elevator operation process, the problem of magnetization unsaturation caused by speed effects can easily lead to deformation of the magnetic flux leakage detection signal, thereby affecting the accuracy and reliability of wire breakage quantitative detection. Therefore, this article focuses on the problem that existing wire rope detection methods cannot perform non-destructive testing on high-speed elevator wire ropes and conducts design and experimental research on a high-speed running wire rope breakage detection device based on the principle of multi-stage excitation. The main research content includes simulation research on the multistage excitation, structural design, and simulation optimization of open–close copper sheet magnetizers and the building of a detection device for wire rope breakage detection experimental research. The simulation and experimental results show that the multistage magnetization method can effectively solve the problem of magnetization unsaturation caused by the velocity effect. The multistage excitation device has a good wire breakage recognition effect for speeds less than or equal to 3 m/s. It can detect magnetic leakage signals with a minimum of four broken wires and has good detection accuracy. It is a new and effective wire breakage detection device for high-speed elevator wire rope, providing important technical support for the safe and reliable operation of high-speed elevators.

Keywords

• wire rope
• high speed
• multistage
• excitation
• wire break detection