Experimental investigation of generating superheated steam using a parabolic dish with a cylindrical cavity receiver: A case study

Abstract

This study uses solar energy to convert steam from a saturated to a superheated state using a solar steam superheater system. This collector system comprised a parabolic dish with a cylindrical cavity. The parabolic dish is of 2 m diameter and 0.83 m focal distance, covered with a reflective surface made of 1,283 rectangular pieces of mirrors, each of 3.5 cm × 4 cm that were fixed in place with glue type (FnTai). The receiver is a stainless-steel cylindrical cavity having a diameter of 17 cm and a length of 25 cm. A helical copper coil with a diameter of 10 mm and a length of 6 m was inserted inside the cylindrical cavity. The experimental work utilized saturated steam produced separately from an auxiliary electric boiler system, which was made along with other system components. A 0.011 kg/s of saturated steam at a temperature of 112°C enters the copper coil and is heated by the solar radiation reflected by the parabolic dish onto the receiver. As a result, the temperature of the steam is increased to 169.5°C at the receiver outlet. It was found that the collector efficiency is 55.6%. In addition, the convection and radiation heat losses are 12.14 and 10.98%, respectively. Also, the heat losses of (spillage, reflection, and conduction) were estimated to be 21.18%. The mass flow rate and pressure of the saturated steam from the boiler and entering the receiver affected the superheated steam production process. The process of superheating the steam, coupled with the subsequent improvement in thermal performance, indicates an increased efficiency of the collector. This is achieved by boosting the generation of useful heat and mitigating heat losses.

Keywords

• superheated steam
• steam generation
• cylindrical cavity receiver
• parabolic dish
• solar dish