Single‐stage ZVS boost integrated push–pull power factor correction converter

Abstract

Abstract This study proposes a cutting‐edge AC/DC converter designed for medium‐power PFC applications. The converter is a single‐phase, single‐stage boost‐push–pull model. It consists of three key components: an interleaved boost, a push–pull, and a resonant tank circuit. The interleaved boost operates in DCM mode and serves as power factor correction. The push–pull converter includes a resonant tank on the secondary side of the transformer to achieve ZVS. The two switches control the boost and the push–pull circuits to create a single‐stage converter. The converter in question provides an array of advantages, such as zero voltage switching (ZVS), an intermediate bus voltage that is independent of the load, and a low‐ripple input current, all of which can be achieved without the need for additional filtering. The present article provides a comprehensive overview of the design procedure, simulation and experimental results, and separate operating modes analysis. To verify the design and simulation results, a 200‐W interleaved boost push–pull converter (IBPPC) prototype is implemented. Finally, because it is crucial to maintain the voltage of the bus capacitor within an acceptable range, this study investigated the impact of load variation on the bus voltage.

Keywords

• AC‐DC power converters
• power factor correction
• zero voltage switching