The influences of nanoparticles on the microstructure evolution mechanism and mechanical properties of laser welded stainless steel/aluminum

Abstract

In order to solve the problem of poor performance of welded joints of steel and aluminum dissimilar materials, this study proposes the use of ceramic particle-reinforced aluminum alloy as an alternative to traditional aluminum alloy for welding, effectively overcoming this problem. In this paper, the laser welding of stainless steel/6061 aluminum alloy (SA) and stainless steel/TiC–TiB2 duplex nanoparticle-reinforced 6061 aluminum alloy (SRA) was realized. The effect of ceramic nanoparticles on the microstructure and mechanical properties of SRA joint was systematically studied, and the strengthening mechanism of nanoparticles was revealed. Under the same process parameters, the melting zone of SRA joint is larger and the intermetallic compound (IMCs) layer is narrower. Moreover, the grain size of the brittle Fe–Al compound phase in the IMCs layer is significantly reduced, which effectively inhibits the initiation of cracks at the steel/aluminum interface. The study shows that ceramic particles have a pinning effect on the dislocations, limiting the grain growth, reducing the thickness of the intermetallic compound layer, and decreasing the content of the brittle FeAl3 phase. Moreover, ceramic nanoparticles promote the formation of Mg2Si strengthened phase at the grain boundary, further hinder the dislocation movement and improve the strength of the joint. Under the welding power of 3400 W and welding speed of 31 mm/s, SRA joint achieves the maximum tensile shear of 1718 N, which is 15% higher than the strength of SA joint.

Keywords

• Stainless steel/Aluminum
• Laser welding
• TiC–TiB2 nanoparticles
• Microstructures
• Mechanical properties