Science and Technology of Advanced Materials (Dec 2023)
The planar anodic Al2O3-ZrO2 nanocomposite capacitor dielectrics for advanced passive device integration
Abstract
ABSTRACTThe need for integrated passive devices (IPDs) emerges from the increasing consumer demand for electronic product miniaturization. Metal-insulator-metal (MIM) capacitors are vital components of IPD systems. Developing new materials and technologies is essential for advancing capacitor characteristics and co-integrating with other electronic passives. Here we present an innovative electrochemical technology joined with the sputter-deposition of Al and Zr layers to synthesize novel planar nanocomposite metal-oxide dielectrics consisting of ZrO2 nanorods self-embedded into the nanoporous Al2O3 matrix such that its pores are entirely filled with zirconium oxide. The technology is utilized in MIM capacitors characterized by modern surface and interface analysis techniques and electrical measurements. In the 95–480 nm thickness range, the best-achieved MIM device characteristics are the one-layer capacitance density of 112 nF·cm−2, the loss tangent of 4·10−3 at frequencies up to 1 MHz, the leakage current density of 40 pA·cm−2, the breakdown field strength of up to 10 MV·cm−1, the energy density of 100 J·cm−3, the quadratic voltage coefficient of capacitance of 4 ppm·V−2, and the temperature coefficient of capacitance of 480 ppm·K−1 at 293–423 K at 1 MHz. The outstanding performance, stability, and tunable capacitors’ characteristics allow for their application in low-pass filters, coupling/decoupling/bypass circuits, RC oscillators, energy-storage devices, ultrafast charge/discharge units, or high-precision analog-to-digital converters. The capacitor technology based on the non-porous planar anodic-oxide dielectrics complements the electrochemical conception of IPDs that combined, until now, the anodized aluminum interconnection, microresistors, and microinductors, all co-related in one system for use in portable electronic devices.
Keywords