Different aging behaviors at surface layer and central region of a die-casting A380 alloy during heat treatment

Abstract

Microstructural and hardness evolutions of a vacuum-assistant die-cast A380 (Al-8.67wt.%Si-3.27wt.%Cu) alloy during heat treatment were investigated. Isothermal DSC test at 200 °C revealed that the precipitation reaction in the surface layer was faster than that in the central region. This corresponded with the hardness evolution that the surface layer hardened faster. The hardness increment in the surface layer was higher than that in the central region. Further experimental evidences indicated that the differences were due to the different amounts of heterogeneous nucleation sites for precipitation in the two parts. The influence of the characteristic as-cast microstructure on the artificial aging process is analyzed and discussed in detail.

Keywords

• high pressure die casting (HPDC)
• heat treatment
• macro-segregation
• kinetics
• precipitation
• externally solidified crystals (ESCs)