Position Control of a Serial Manipulator Using Fuzzy-PID Controllers

Abstract

This paper presents the position control of a six-axis serial manipulator by using a fuzzy-PID controller. The manipulator has six joints, and each joint is driven by a motor with an encoder for sensing the joint angle. To complete a position movement of the end-effector of the manipulator, the position coordinate first needs to be converted to a sets of joint angles by using the inverse kinematics of the manipulator, and each joint rotation is executed by a feedback control of a motor. To demonstrate the performance the fuzzy-PID controller, a PID controller and two fuzzy controllers are also applied. The results show that the fuzzy-PID controller provides a better performance with a smaller steady-state error.

Keywords

• Position Control
• Serial Manipulator
• Fuzzy-PID Controller.