Effect of wood varnish coating on the water absorption and mechanical properties of jute fiber reinforced epoxy composites

Abstract

Natural fiber-reinforced composites are becoming popular day by day because of their low cost and renewable nature. However, a major concern of these composites is water absorption. To minimize the water absorption in natural fiber-reinforced composites, wood varnish coating was used in this paper to investigate the effect of this coating on water absorption and mechanical properties of jute fiber-reinforced composites. Four types of composites were fabricated using the hand lay-up technique, among them on Type 1 no coating was used, Type 2 was surface coated, Type 3 was fiber coated and Type 4 was both fiber and composite surface coated. Water absorption, tensile, bending, short beam shear, and impact tests were performed on the composite specimens according to their respective ASTM standards to see the effect of coating. Both fiber and fracture surface morphology were observed using Scanning Electron Microscope. It was found that the water absorption was significantly reduced for Type 2 (50.31 %) and Type 4 (56.01 %) specimens. However, the tensile strength and bending strength were reduced by 74.17 %, and 72.71 % for Type 3 and 77.07 % and 84.24 % for Type 4 composites while for Type 2, they were slightly increased (7.26 % and 1.13 %). The ILSS of Type 3 and Type 4 were reduced by 69.34 % and 58.07 % respectively while it was reduced by only 4.49 % for Type 2 composite. On the other hand, the impact energy absorption was increased by 85.32 % for Type 4 composite. The findings of this study suggest that Type 2 composite (only composite surface coating) has the overall best performance and wood varnish coating has the potential to reduce the water absorption on natural fiber-reinforced composites.

Keywords

• Jute fiber
• Coating
• Water absorption
• Wood varnish
• Mechanical properties