Feasibility of the Purification of Pharmaceuticals from Aqueous Solutions using Carbon Nanotubes in the Presence of Oxidizers

Abstract

In this research, the methods of oxidation, oxidation along with carbon nanotubes and surface absorption of carbon nanotubes were investigated to remove the drug substance of cefixime from aqueous solutions. In these methods, the removal percentage of cefixime was 78%, 96% and 70% respectively. Therefore, the results showed that oxidation with carbon nanotubes had a positive effect on the removal of cefixime. For this reason, oxidation along with carbon nanotubes was used to remove the cefixime. Next, different operating parameters such as the concentration of drug pollutants (20,30,40 and 55ppm), reaction time (5,10,15,20,25 and 30 min), concentration of hydrogen peroxide (1, 3 and 5ml) and amount of carbon nanotubes (0.05, 0.01 and 0.2 g/l) were studied in the removal process of cefixime using the method of oxidation along with carbon nanotubes. It should be noted that in all experiments, certain amounts of carbon nanotubes and the oxidizing agent of hydrogen peroxide were used. In addition, a mixer, with a given round, was used to mix the materials. The maximum removal efficiency of cefixime from aqueous solutions is about 96% , which is related to the process of the removal of cefixime at the constant concentration of 55 mg/L by 0.1 g/L of carbon nanotubes and 5ml of hydrogen peroxide at the t = 30 min.

Keywords

• oxidation
• carbon nanotube
• pharmaceutical wastewater
• cefixime