Coal-Bearing Zone Transformation into a Coalless One at the Open Pit

Abstract

Currently, two types of handling machines are mainly used on coal open pit mines in Kuzbass, characterized by complex structural deposits: mechanical (rope) and hydraulic (backhoe) shovels. Moreover, both types of equipment are supplied to the quarries: mechanical shovels are purchased, as a rule, powerful with a bucket capacity up to 56 m3, backhoes – small and medium-size models with a bucket capacity of 2.8-14 m3. On the other hand, it is common to divide the areas of equipment use in the open pit on complex-structured deposits into a coalless (outside the strata of coalbeds) and coal-bearing (actually a series of beds, including coal strata and rock interbeds). The use of these equipment types in both design and industrial practice is observed in both zones. At the same time, it is known that each of these zones has different conditions for the efficient operation of excavation machines. The seams, therefore, do not complicate the coalless zone when working in it, favorable conditions are provided for the excavator: the constant height of the bench, which is necessary for the full filling of the bucket for one scoop, the constant width of the panel and the length of the front of the work. In these conditions, the maximum productivity of the excavator is ensured.