Diagnostics (Jun 2024)

Clinical and Hemodynamic Features of Aneurysm Rupture in Coil Embolization of Intracranial Aneurysms

  • Tomoaki Suzuki,
  • Hitoshi Hasegawa,
  • Kohei Shibuya,
  • Hidemoto Fujiwara,
  • Makoto Oishi

DOI
https://doi.org/10.3390/diagnostics14111203
Journal volume & issue
Vol. 14, no. 11
p. 1203

Abstract

Read online

Intraprocedural rupture (IPR) during coil embolization (CE) of an intracranial aneurysm is a significant clinical concern that necessitates a comprehensive understanding of its clinical and hemodynamic predictors. Between January 2012 and December 2023, 435 saccular cerebral aneurysms were treated with CE at our institution. The inclusion criterion was extravasation or coil protrusion during CE. Postoperative data were used to confirm rupture points, and computational fluid dynamics (CFD) analysis was performed to assess hemodynamic characteristics, focusing on maximum pressure (Pmax) and wall shear stress (WSS). IPR occurred in six aneurysms (1.3%; three ruptured and three unruptured), with a dome size of 4.7 ± 1.8 mm and a D/N ratio of 1.5 ± 0.5. There were four aneurysms in the internal carotid artery (ICA), one in the anterior cerebral artery, and one in the middle cerebral artery. ICA aneurysms were treated using adjunctive techniques (three balloon-assisted, one stent-assisted). Two aneurysms (M1M2 and A1) were treated simply, yet had relatively small and misaligned domes. CFD analysis identified the rupture point as a flow impingement zone with Pmax in five aneurysms (83.3%). Time-averaged WSS was locally reduced around this area (1.3 ± 0.7 [Pa]), significantly lower than the aneurysmal dome (p < 0.01). Hemodynamically unstable areas have fragile, thin walls with rupture risk. A microcatheter was inserted along the inflow zone, directed towards the caution area. These findings underscore the importance of identifying hemodynamically unstable areas during CE. Adjunctive techniques should be applied with caution, especially in small aneurysms with axial misalignment, to minimize the rupture risk.

Keywords