Горные науки и технологии (Mar 2023)
Study of gas hazard pattern in underground workings after blasting
Abstract
Determining the sources of hazardous and toxic substances released into mine air, their gas composition, as well as providing each such source of pollution with the required amount of fresh air are important issues in terms of ensuring normal healthy and safe working conditions for miners. This paper studies blasting as one of the most dangerous sources of mine air pollution. The study was carried out for a long dead-end exploration working, and a development (preparatory) working of a copper-nickel mine. In accordance with the federal rules and regulations (FNiP), a number of requirements, including monitoring of gas hazard at a face, is applied to blasting operations. The study examined the behavior of gas-air mixture in dead-end mine workings after blasting. The findings are based on the experimental data obtained in the conditions of two dead-end workings at an operating coppernickel mine. A technique for the experimental studies of gas release after blasting in a dead-end working was developed. The main technical characteristics of the instruments involved in the in-situ measurements are given. Time dependences of the concentrations of toxic gases after blasting at the blasted working mouth, at the return ventilation current, and near a booster were established. In order to assess the reliability of the data obtained, the volume of released carbon oxides was calculated based on the data of gas analyzers and chemical reactions of explosives decomposition during detonation, depending on the types and weights of the explosives. A model of gas-air mixture transfer was described, constructed, and calibrated allowing for longitudinal dispersion. The Voronin model was used to simulate the gradual removal of toxic gases from the working face and solving the problem of boundary conditions. Based on experimental data, the coefficients of longitudinal dispersion, ventilation efficiency, and volume concentration of the considered gas admixture in the mixing zone at initial time were determined for a long dead-end mine working. The constructed gas-dynamic model and longitudinal dispersion coefficients obtained as a result of the analysis enabled the time required for long dead-end mine workings ventilation to be analysed and estimated. Based on the model, the algorithm for calculating the velocity of spreading the combustion products in a mine ventilation network in emergency situations is being improved. The value of longitudinal dispersion coefficient for different operating conditions is also being refined. Based on the gas distribution simulation within the interval of 1,500 m from a working face, the time required for the ventilation of a dead-end mine working was determined.
Keywords
