Journal of Materials Research and Technology (Jul 2023)
Continuous tempering effect induced PWHT alternative technology using wire arc additive manufacturing for application in replacing nuclear pressurized water reactor system repairing: CALPHAD, FEM simulation, and EBSD investigation
Abstract
This study proposes an effective repair technology using arc additive manufacturing for pressurized water reactors (PWRs) in nuclear power plants (NPP) aimed at avoiding complete replacements and post-weld-heat treatments (PWHTs) of component parts while ensuring safety and reliability. Effective repair technology is defined as economic and process efficiency, because of maintenance costs and radiation exposure, and it is critical in related industries. The technology is designed to relieve the hardness and martensite fraction of the welding heat affected zone (HAZ) of low alloy steels (SA508) in PWRs penetration/nozzles by heat source generated in the WAAM process, thus ensuring structural integrity. In the first layer of wire arc additive manufacturing processes, 89.6% of the martensite phase was formed in the HAZ of SA508, which was significantly reduced to 45.7% due to repetitive thermal behaviors at the third layer. The resulting process dramatically reduced hardness from 450Hv in the initial layer additive manufacturing to 320Hv in 3 layers without additional heat treatments. Moreover, the study quantitatively investigated the martensite starting temperature (Ms) and bainite starting temperature (Bs) and analyzed the microstructure and mechanical behavior of the developed process using thermodynamic calculation (CALPHAD), finite element method (FEM) simulation, and microstructure quantitative analysis by electron backs-catter diffraction (EBSD). The proposed technologies and their quantitative analysis results can be a substantial alternative to the repair technology for penetration/nozzles in nuclear primary water cooling reactor applications, complying with ASME Sec.IX Qw-462.12 and ISO 15614-1.
