Optical Detection of VOC Vapors Using Nb₂O₅ Bragg Stack in Transmission Mode

Abstract

In this study, an emphasis is put on vapor-sensitive Bragg stacks as an important class of optical sensors. All-niobia Bragg stacks were deposited by spin-coating of sol-gel Nb2O5 thin films alternated with mesoporous layers after proper design through optimization of operating wavelength and number of layers in the stack. Mesoporous Nb2O5 films with different morphology and identical structure were obtained using organic templates (Pluronics PE6200 and PE6800) and subsequent annealing. Transmittance measurements were performed as a detection method that offers technological simplicity and accuracy. It was demonstrated that stacks including PE6200 templated films exhibit higher sensitivity than stacks templated with PE6800. It was assumed and verified by computer-aided modelling of experimental data that mesoporous films prepared with addition of PE6200, although less porous, were more stable compared to those templated with PE6800, and did not collapse during the thermal treatment of the stacks. Furthermore, the reproducibility of optical response was studied by sorption and desorption cycles of acetone vapors. The suitability of all-niobia Bragg stacks for optical sensing of VOCs was discussed.

Keywords

• optical sensing
• Bragg stacks
• Nb₂O₅
• mesoporous films
• sol-gel