Problemy Mechatroniki (Jun 2023)

Analysis of the Possibility of Elimination of Threats Resulting from the Modification of Bullet Trajectory after Hitting the Target in Garrison Shooting Ranges

  • Józef GACEK,
  • Wojciech KOPERSKI,
  • Bronisław MARCINIAK,
  • Ryszard WOŹNIAK,
  • Dariusz TYMIŃSKI,
  • Ewa MORZYK,
  • Konrad SUSKA,
  • Przemysław SIDELNIK,
  • Przemysław LEWANDOWSKI

DOI
https://doi.org/10.5604/01.3001.0053.6674
Journal volume & issue
Vol. 14, no. 2
pp. 109 – 126

Abstract

Read online Read online

. During shooting operations in garrison shooting ranges, a phenomenon of random deflection of the bullet flight path was noticed which may cause secondary reflections from accidentally hit technical and ballistic shooting range elements and the ground of the actual plane of the shooting range (ricochets posing a threat to people and property within the shooting range and safety zones). Minimisation of this phenomenon must be considered during the design and operation of the shooting ranges. In 20202022 the Military Institute of Armament Technology (Zielonka, Poland) carried out tests with the aim of determining the impact of the shooting target or military target material or design (hereinafter referred to as the targets) on the risk of occurrence of modifications of bullet trajectory that cause the bullets to leave the shooting zone. The paper presents example results of these tests that show, but are not limited to, that the reasons to modify the direction of the bullet path after target penetration and any ricochets include: target material (flat or corrugated sheet metal, cardboard, plywood, etc.), target wooden legs, and even metal elements fixing the legs to the target. On the basis of the test it was shown that the metal targets prohibited on intermediate lines may cause significant deflections of the bullet flight path after penetration and dangerous ricochets. Due to the reason presented above, the metal targets are placed on the last line of targets before the main bullet trap only where the technical and ballistic parameters of the bullet trap ensure that any ricochets are captured. It was stated that the contact targets used on intermediate target lines and provided with wooden legs may cause bullet trajectory changes comparable to or even greater than in the case of the prohibited metal targets. To this end it is advisable to establish legal framework covering the ballistic inspection of the target materials to be used in garrison shooting ranges.

Keywords