Photo-Thermal Dry Reforming of Methane with PGM-Free and PGM-Based Catalysts: A Review
Alessio Varotto,
Umberto Pasqual Laverdura,
Marta Feroci,
Maria Luisa Grilli
Affiliations
Alessio Varotto
Energy Technologies and Renewable Sources Department, Italian National Agency for New Technologies, Energy and Sustainable Economic Development (ENEA), Via Anguillarese 301, 00123 Rome, Italy
Umberto Pasqual Laverdura
Energy Technologies and Renewable Sources Department, Italian National Agency for New Technologies, Energy and Sustainable Economic Development (ENEA), Via Anguillarese 301, 00123 Rome, Italy
Marta Feroci
Department of Fundamental and Applied Sciences for Engineering (SBAI), Sapienza University of Rome, Via Castro Laurenziano, 7, 00161 Rome, Italy
Maria Luisa Grilli
Energy Technologies and Renewable Sources Department, Italian National Agency for New Technologies, Energy and Sustainable Economic Development (ENEA), Via Anguillarese 301, 00123 Rome, Italy
Dry reforming of methane (DRM) is considered one of the most promising technologies for efficient greenhouse gas management thanks to the fact that through this reaction, it is possible to reduce CO2 and CH4 to obtain syngas, a mixture of H2 and CO, with a suitable ratio for the Fischer–Tropsch production of long-chain hydrocarbons. Two other main processes can yield H2 from CH4, i.e., Steam Reforming of Methane (SRM) and Partial Oxidation of Methane (POM), even though, not having CO2 as a reagent, they are considered less green. Recently, scientists’ challenge is to overcome the many drawbacks of DRM reactions, i.e., the use of precious metal-based catalysts, the high temperatures of the process, metal particle sintering and carbon deposition on the catalysts’ surfaces. To overcome these issues, one proposed solution is to implement photo-thermal dry reforming of methane in which irradiation with light is used in combination with heating to improve the efficiency of the process. In this paper, we review the work of several groups aiming to investigate the pivotal promoting role of light radiation in DRM. Focus is also placed on the catalysts’ design and the progress needed for bringing DRM to an industrial scale.
