MATEC Web of Conferences (Jan 2015)

An Experimental Study on Rate-sensitive Tensile Deformation Behaviour of Fe-based Shape Memory Alloy

  • Iwamoto Takeshi,
  • Fujita Kazuki

DOI
https://doi.org/10.1051/matecconf/20153304003
Journal volume & issue
Vol. 33
p. 04003

Abstract

Read online

Recently, it is attempted to apply high manganese steel including Fe-based shape memory alloy to vibration dampers. Especially, the alloy indicates a special characteristic as a well-known shape memory effect. By coupling between this effect and its plastic deformation, it can be considered that its deformation behaviour at higher deformation rate becomes quite complicated and still unclear. In this study, tensile tests of Fe-based shape memory alloy at different rate of deformation are conducted by using two different testing apparatuses such as the conventional material testing machine and impact testing machine based on the split Hopkinson pressure bar technique. In the tests, temperature rise is captured during the quasi-static deformation. After the quasi-static test, the recovery strain due to shape memory effect is measured by heating up the deformed specimens to Af temperature. Finally, the rate sensitivity of the alloy is discussed including the recovery strain.