Circular Bioassay Platforms for Applications in Microwave-Accelerated Techniques

Abstract

In this paper, we present the design of four different circular bioassay platforms, which are suitable for homogeneous microwave heating, using theoretical calculations (i.e., COMSOLTM multiphysics software). Circular bioassay platforms are constructed from poly(methyl methacrylate) (PMMA) for optical transparency between 400-800 nm, has multiple sample capacity (12, 16, 19 and 21 wells) and modified with silver nanoparticle films (SNFs) to be used in microwave-accelerated bioassays (MABs). In addition, a small monomode microwave cavity, which can be operated with an external microwave generator (100 W), for use with the bioassay platforms in MABs is also developed. Our design parameters for the circular bioassay platforms and monomode microwave cavity during microwave heating were: (ⅰ) temperature profiles, (ⅱ) electric field distributions, (ⅲ) location of the circular bioassay platforms inside the microwave cavity, and (ⅳ) design and number of wells on the circular bioassay platforms. We have also carried out additional simulations to assess the use of circular bioassay platforms in a conventional kitchen microwave oven (e.g., 900 W). Our results show that the location of the circular bioassay platforms in the microwave cavity was predicted to have a significant effect on the homogeneous heating of these platforms. The 21-well circular bioassay platform design in our monomode microwave cavity was predicted to offer a homogeneous heating pattern, where inter-well temperature was observed to be in between 23.72-24.13℃ and intra-well temperature difference was less than 0.21℃ for 60 seconds of microwave heating, which was also verified experimentally.

Keywords

• circular pmma platform
• comsol simulations
• microwave-accelerated bioassays
• silver island films
• microwave heating
• metal-assisted and microwave-accelerated evaporative crystallization