Open-Field Agrivoltaic System Impacts on Photothermal Environment and Light Environment Simulation Analysis in Eastern China

Abstract

In order to clarify the temporal and spatial changes in the internal photothermal environment in an open-field agrivoltaic system (OAVS), this paper took the OAVS in eastern China as the research object and divided the internal area into the southern area, middle area and northern area, according to the spatial structure. Further, a photothermal environment test was conducted in the above three areas in the summer and winter. The results showed that the summer average daylight rate (Rm-avg) in the middle area was 66.6%, while the Rm-avg in the other two areas was about 20%, with no significant difference. In the winter, the light environment in the southern area was slightly better, and the Rm-avg in the above three areas was 26.4%, 24.7% and 19.7%, respectively. On the whole, the relationship between the thermal environmental factors and the solar radiation intensity was consistent. Further, a 3D model of an OAVS was established using Autodesk Ecotect Analysis 2011, and the internal light environment was simulated. Compared with the measured values, the relative error was less than 10%, which verified the reliability of the OAVS model. Then, the model was used to reveal the temporal and spatial changes in the light environment of the OAVS. The simulation results showed that the daylighting rate in the summer from the ground to the height of the fig canopy inside the system was 20.7% to 61.5%. In the winter, the daylighting rate from the ground to the height of the fig canopy inside the system was 17.7% to 36.4%. The effectiveness of the OAVS in reducing the level of solar radiation intensity depended on the time of day and the angle of the sun. At the spatial scale, due to the strong consumption of light by photovoltaic panels, there was a strong horizontal and vertical light environment gradient inside the system. In conclusion, the photothermal environment research of an OAVS based on Autodesk Ecotect Analysis 2011 can not only provide a basis for agricultural production and structural design such as span, height and the laying density of PV panels, but also expand its application to regions with different latitudes and longitudes and specific climates.

Keywords

• agrivoltaics
• agricultural building
• photothermal environment
• ECOTECT
• simulation