The Effect of the Vertical Component of the Earthquake on a Regular Masonry Wall

Abstract

The effect of the vertical component of earthquakes on the structural behaviour of unreinforced masonry (URM) walls is usually not considered by technical codes for ordinary buildings. Recent scientific literature, however, indicates that the earthquake vertical component may play a significant role in the crack pattern of URM walls and their collapse. This paper investigates the effect of the vertical seismic component on the capacity and damage scenario for a two-story regular URM wall, described with a detailed micro-modelling approach. Pushover and nonlinear time history analyses are carried out with and without the vertical component and under different dead loads representative of typical stress states for URM structures. The inter-story drift and roof drift ratios are introduced as Engineering Demand Parameters (EDPs), and their correlation with the Ground Motion Parameters (GMPs) of the horizontal and vertical components is discussed. The results show a very good correlation between the seismic demand and the GMPs of the vertical component, demonstrating the influence of the vertical component on the global seismic response. Moreover, the study shows that the influence of the vertical component increases with the vertical load applied to the structure, which indicates that the vertical ground motion component cannot be a priori neglected for URM walls when moderate to large vertical GMPs are expected.

Keywords

• masonry structures
• URM walls
• earthquake vertical component
• micro-modelling
• nonlinear static analysis
• nonlinear time history analysis