Case Studies in Thermal Engineering (Jul 2024)
The effect of adding hybrid nanoparticles (Al2O3–TiO2) on the performance of parabolic trough solar collectors using different thermal oils and molten salts
Abstract
Enhancing the operational efficiency of parabolic trough solar collector (PTSC) systems is key to the advancement of solar energy technologies that enhance power generation sustainability. In the quest for efficient, environmentally friendly energy sources, solar energy systems have been a major focus of both researchers and industry. Adding hybrid nanoparticles (Al2O3–TiO2) to different base fluids of thermal oil or molten salts and then simulating the PTSC's energetic and exergetic performance is pivotal to efficiency enhancement. The focus of this paper will be on three thermal oils Syltherm-800, Therminol VP-1, and Therminol 75 that are used as base fluids with the addition of hybrid nanoparticles. Molten salts such as Solar Salt, Hitec, and HitecXL, which are considered different base fluid types, are also simulated with the same hybrid nanoparticle combination. The inlet temperature is found to be a determining factor in the choice of the base fluid. Inlet temperatures in the range of 300–650 K for thermal oils with the addition of Al2O3–TiO2 have improved the thermal and exergy efficiency of the PTSC by approximately 0.99 % and 0.59 %, respectively. Therminol VP-1/Al2O3–TiO2 has the highest average thermal efficiency among other thermal oils, with an average percentage of 71.68 %, while Syltherm-800/Al2O3–TiO2 has recorded the highest exergy efficiency of 24.1 %. At higher inlet temperatures above 500 K mixing Al2O3–TiO2 with molten salts has increased both energetic and exergetic PTSC performance by approximately 0.60 %. Solar Salt/Al2O3–TiO2 has the highest average thermal and exergy efficiency of 61.8 % and 36.1 %, respectively.