Efficient removal of 2-chlorophenol from aqueous solution using TiO2 thin films/alumina disc as photocatalyst by pulsed laser deposition

Abstract

Abstract Pulsed laser deposition facilitates the epitaxial deposition and growth of TiO2 at low temperature on hot substrate. In this study, nanosized nitrogen-doped TiO2 thin films were deposited on fabricated alumina disc-shaped and glass substrates. Textural properties of the fabricated disc and alumina disc-supported TiO2 were investigated using N2 adsorption–desorption isotherms, field emission scanning electron microscopy (FESEM), X-ray diffraction and Fourier transform infrared (FTIR) spectroscopy. FESEM showed the presence of single crystals of TiO2 on the alumina disc. FTIR showed the presence of octahedral TiO2 and different hydroxyl groups on the surface which is responsible for the photoactivity and also showed the functional groups adsorbed on the catalyst surface after the photocatalytic degradation. The concentration of 2-chlorophenol and the photo-redox intermediate products as a function of irradiation time was determined. The concentration of the produced chloride ion during the photocatalytic degradation was determined by an ion chromatography. The results showed that the photocatalytic activity of the catalyst decreased upon cycling. The obtained results were compared with nanostructured TiO2 supported on glass substrate. Higher efficiency of 100% degradation was achieved for TiO2/Al2O3 catalyst, whereas about 70% degradation of 2-CP was achieved using TiO2/glass. Different photointermediates of 2-CP degradation have been identified for each cycle. The difference of intermediates is supported by the adsorbed fragments on the catalyst surface.

Keywords

• Thin film
• Pulsed laser deposition
• Photocatalytic degradation
• 2-Chlorophenol