A New Relative Permeability Characterization Method Considering High Waterflooding Pore Volume

Abstract

In the process of waterflooding development, high waterflooding PVs will make the fluid percolation in the reservoir more complicated, resulting in lower efficiency of waterflooding. High waterflooding PVs will affect the relative permeability and change the seepage law of oil–water two-phase flow in a high water-cut period. In this study, we performed high waterflooding PVs relative permeability experiments using nine natural cores. The unsteady measurement method is used to test the relative permeability curve. The results show that: (1) the relative permeability is affected by the waterflooding PVs, the recovery efficiency of 2000 waterflooding PVs is 10.72% higher than that of 50 waterflooding PVs on the core scale; (2) it makes water mobility increase sharply, while oil phase flow capacity remains low and decreases at high water cut stage. A new relative permeability characterization method considering high waterflooding PVs is established, which is applied to the numerical simulator. It shows that the remaining oil saturation of the high-permeability belt is higher than the calculation results of the traditional numerical simulator. It means that the injected water does not diffuse much into the low-permeability zone of the formation. The modified simulator is validated with the actual China offshore oilfield model. The numerical saturation of the key section of the passing well is in good agreement with the actual logging interpretation results, and the water cut curve fits better in the whole area. The modified simulator could predict oil production accurately after high waterflooding PVs treatment.

Keywords

• relative permeability
• high waterflooding PVs
• numerical simulation
• physical simulation