Frequency Multiplier and Mixer MMICs Based on a Metamorphic HEMT Technology Including Schottky Diodes

Abstract

This paper reports on the monolithic integration of layout-optimized Schottky diodes realized in an established 50-nm gate-length metamorphic high-electron-mobility transistor technology for use in multifunctional nonlinear circuits. The suitability of the realized Schottky diodes is demonstrated by a broadband millimeter-wave I/Q-mixer (In-phase/Quadrature) and local oscillator (LO) chain comprising two power amplifiers and a frequency tripler, fabricated on monolithic microwave integrated circuits (MMICs). Both circuits are based on an anti-parallel Schottky diode topology. The subharmonically-pumped I/Q-mixer covers an RF (radio frequency) and IF (intermediate frequency) range of at least 75 GHz to 110 GHz and 0.5 GHz to 15 GHz, respectively. The single-sideband conversion loss is between 14 dB and 16 dB across most of the entire RF and IF bands. The core of the LO chain consists of a frequency tripler (multiplier by three) and features a bias-adjustable output power with almost constant conversion efficiency and a control range of more than 8 dB. The fully-integrated LO chain MMIC matches the needs of the presented I/Q-mixer and exhibits an average output power of 16.3 dBm with a covered frequency range of 38 GHz to 60 GHz. The unwanted harmonics are suppressed by at least -25.9 dBc below the third harmonic for the entire frequency range and better than -32.1 dBc for most part of the band. Thus, the mixer and tripler MMICs demonstrate state-of-the-art performance with regards to, e.g., covered bandwidth, output power, harmonic suppression, or 1 dB compression point.

Keywords

• High-electron-mobility transistors (HEMTs)
• Ku-band
• millimeter wave (mmW)
• monolithic microwave integrated circuits (MMICs)
• mixers
• frequency multipliers