PLoS ONE (Jan 2019)

Carbon-based sprayed electrodes for pyroelectric applications.

  • C Chirila,
  • M Botea,
  • A Iuga,
  • A G Tomulescu,
  • L Balescu,
  • A C Galca,
  • A G Boni,
  • L Leonat,
  • I Pintilie,
  • L Pintilie

DOI
https://doi.org/10.1371/journal.pone.0221108
Journal volume & issue
Vol. 14, no. 8
p. e0221108

Abstract

Read online

A carbon-based layer was deposited by spraying on top of a ferroelectric layer grown by sol-gel on Si (001) substrate and its properties as electrode and absorber for pyroelectric detection were tested. It was found that the electric properties of the ferroelectric capacitor with top carbon-based sprayed electrode (CBSE) are comparable with those of the capacitors with standard top SrRuO3 (SRO)/Au electrode. Pyroelectric measurements show that the pyroelectric signal recorded on ferroelectric capacitors with top CBSE electrode is 2.5 times greater than for top SRO/Au electrode for low frequency range. The value of the pyroelectric coefficient was estimated to 9.73·10-4 C/m2K for CBSE electrodes and 3.36·10-4 C/m2K for SRO/Au respectively. The fabrication process of CBSE is of low cost, easy to implement and with high throughput making it attractive for manufacturing various devices like pyroelectric detector, thermal imaging, solar cells, etc.