Study on Optimization Strategy for the Composition Transition Gradient in SS 316L/Inconel 625 Functionally Graded Materials

Abstract

Wire arc additive manufacturing (WAAM) technology enables the fabrication of functionally graded materials (FGMs) by adjusting the wire feed speed of different welding wires in a layer-by-layer manner. This study aimed to produce SS 316L/Inconel 625 FGMs with varying transition compositions using dual-wire arc additive manufacturing (D-WAAM). An optimization strategy for transition gradients was implemented to exclude component regions that are prone to defect formation (notably cracking), as well as to retain other component regions, thereby enhancing the overall mechanical properties of FGMs. The study revealed grain boundary cracking and demonstrated the lowest microhardness and tensile properties within a 20 wt.% Inconel 625 transition gradient zone, which negatively impacts the overall mechanical properties of FGMs. Then, as the content of Inconel 625 in the first transition region increased, cracks disappeared, microhardness increased and better tensile properties were obtained. The most optimal mechanical properties were enriched at 50 wt.% Inconel 625 content. In conclusion, the compositional gradient optimization strategy proves efficacious in eliminating component regions with poor mechanical properties and microdefects, ensuring excellent overall mechanical characteristics of FGMs.

Keywords

• functionally graded materials
• dual-wire arc additive manufacturing
• composition transition gradient
• optimization strategy
• microstructure
• mechanical properties