Applied Sciences (Sep 2018)
Optimal Location of the Access Points for MIMO-UWB Systems
Abstract
A multiple-input and multiple-output ultra-wideband (MIMO-UWB) system provides a higher data rate. However, the multipath effect of the intersymbol interference (ISI) increases the bit error rate (BER) and outage probability of the MIMO-UWB system. For this paper, the authors applied the real orthogonal design (ROD) to an MIMO-UWB system to improve the efficiency of that system. A ray-tracing technique and an inverse fast Fourier transform were used to get the impulse response of the indoor environment. In addition, a rake receiver was used to increase the strength of the received signal to minimize the multipath effect. For this paper, two cases of an indoor wireless MIMO-UWB system were studied: case (A) used different antenna arrays, whereas case (B) placed antenna arrays in different locations to find the best position of the transmitter. In case (A), three different shapes of antenna arrays, namely L-shape, circular-shape, and Y-shape, were used for the transmitter and receiver. The BER performance for these arrays in the UWB frequency of 3.1–10.6 GHz was examined. Numerical results showed that the outage probability of the circular array was better than that of the other two arrays. In case (B), the transmitter used was an array with two antenna elements. The optimal location for the transmitter was found by using both asynchronous particle swarm optimization (APSO) and self-adaptive dynamic differential evolution (SADDE). The numerical results indicated that the performance of APSO was better than that of SADDE.
Keywords
