Effect of Rotation Speed on Microstructure and Mechanical Properties of Continuous Drive Friction Welded Dissimilar Joints of 6061-T6 Al and Copper

Abstract

The continuous drive friction welding of 6061-T6 Al and copper was investigated herein. The results show that with an increase in rotation speed, the width of the welded zone was gradually increased with the generation of higher temperatures, and the grain size in the dynamic recrystallization zone on the Al side first decreased and then increased due to the combined effect of heat and force. The microhardness on the bonding surface was significantly greater than that of the base materials due to the presence of intermetallic compounds, and there was a softening zone on both sides of the bonding surface, which was progressively more significant with an increase in the rotation speed. The ultimate tensile strength (UTS) of the welded joints first increased and then decreased with an increase in rotation speed. When the rotation speed was 1000 rpm, the UTS was at its peak value of 212 MPa, which reached 73.1% of the strength of the 6061-T6 Al base material.

Keywords

• dissimilar welding
• continuous drive friction welding
• 6061-T6 Al
• copper
• microstructure
• mechanical properties