Comparative study on one-step pyrolysis activation of walnut shells to biochar at different heating rates

Abstract

Pyrolysis of walnut shells to biochar at 700 °C using N2gas was compared to one-step activation using steam/KOH under four different heating rates (10–40 °C/min). Steam biochars developed better surface area property of 342–556 m2/g compared to others (19–135 m2/g) over the same heating rates; meanwhile, increasing heating rate caused functional groups alteration and was distinct on the surface area property as about six-fold and two-fold difference from the lower to higher rates were recorded in neutral char and the steam/KOH activated biochars respectively. Increasing heating rate affected the neutral and steam biochars’ Raman intensity ratio whereas trivial influence was recorded on KOH-biochars.

Keywords

• Walnut shells
• Pyrolysis
• One-step activation
• Biochar
• Heating rate