International Journal of Analytical Chemistry (Jan 2018)

Comprehensive Assessment of Degradation Behavior of Simvastatin by UHPLC/MS Method, Employing Experimental Design Methodology

  • Maja Hadzieva Gigovska,
  • Ana Petkovska,
  • Jelena Acevska,
  • Natalija Nakov,
  • Packa Antovska,
  • Sonja Ugarkovic,
  • Aneta Dimitrovska

DOI
https://doi.org/10.1155/2018/7170539
Journal volume & issue
Vol. 2018

Abstract

Read online

This manuscript describes comprehensive approach for assessment of degradation behavior of simvastatin employing experimental design methodology as scientific multifactorial strategy. Experimental design methodology was used for sample preparation and UHPLC method development and optimization. Simvastatin was subjected to stress conditions of oxidative, acid, base, hydrolytic, thermal, and photolytic degradation. Using 2n full factorial design degradation conditions were optimized to obtain targeted level of degradation. Screening for optimal chromatographic condition was made by Plackett–Burman design and optimization chromatographic experiments were conducted according to Box-Behnken design. Successful separation of simvastatin from the impurities and degradation products was achieved on Poroshell 120 EC C18 50 × 3.0 mm 2.7 μm, using solutions of 20 mM ammonium formate pH 4.0 and acetonitrile as the mobile phase in gradient mode. The proposed method was validated according to International Conference on Harmonization (ICH) guidelines. Validation results have shown that the proposed method is selective, linear, sensitive, accurate, and robust and it is suitable for quantitative determination of simvastatin and its impurities. Afterwards, the degradation products were confirmed by a direct hyphenation of liquid chromatograph to ion-trap mass spectrometer with heated electrospray ionization interface. This study highlights the multiple benefits of implementing experimental design, which provides a better understanding of significant factors responsible for degradation and ensures successful way to achieve degradation and can replace the trial and error approach used in conventional forced degradation studies.