Optimising image quality in intravenous cerebral cone beam computed tomography

Abstract

Abstract Introduction The efficacy of intravenous cerebral Cone Beam Computed Tomography (IV CBCT) is well established; however, image quality has only ever been authenticated by subjective evaluation. The aim of this study was to quantify the factors pertinent to achieving consistent and optimal image quality when performing IV CBCT. Methods Between 1 March 2021 and 30 October 2022, 79 patients received IV CBCT. These candidates were divided into three main acquisition field size categories (22/32, 42 and 48 cm) according to the clinical indication. The images were analysed using both a quantitative assessment and a subjective evaluation. Here, a comparison of Hounsfield units (HUs), signal‐to‐noise ratio (SNR), contrast‐to‐noise ratio (CNR) and noise index was conducted for each study and compared relative to the acquisition field size. The subjective analysis was performed in a non‐blinded fashion where the diagnostic value (DV) of the exam was determined according to a graded scale. A phantom analysis for each of the acquisition field sizes was conducted and modulation transfer function (MTF) graphed. Results Significantly higher HU, SNR, CNR and lower noise indices were achieved with the 42‐cm protocol than the 22/32 and 48‐cm protocols. Here a greater DV was also reported. The MTF demonstrates marginally improved spatial resolution for the 22‐cm protocol, but this is near equivocal for the 32‐, 42 and 48‐cm protocols. Conclusion The use of larger acquisition field sizes provides improved image quality when performing IV CBCT as an alternative to intra‐arterial (IA) CBCT.

Keywords

• angiography
• head and neck
• vascular interventional