Effect of austempering temperature on microstructure evolution, mechanical properties and wear resistance of carbon-free nano-bainite steel

Abstract

Carbide-free nano-bainite steel holds significant potential for applications in mining as an ultra-high strength wear-resistant steel, but the wear mechanisms are not yet fully understood. This study aims to explore the effect of austempering temperature on microstructure, mechanical properties and wear resistance of carbide-free nano-bainitic steel. The relationship between the content and mechanical stability of retained austenite (RA) and mechanical properties was investigated to elucidate the mechanisms of pin-on-disc wear and impact wear. The results show that in the range of Ms∼300 °C, the phase transformation incubation period and completion time significantly increase with decreasing austempering temperature, which is mainly related to higher phase transformation driving force resulting from a larger subcooling degree and slow growth of carbon content in RA. Optimal strength and hardness of 2099 MPa and 615 HBW, respectively, are achieved after austempering at 210 °C for 83 h. Austempering at 270 °C for 11 h yields the best balance of strength and plasticity, with a strength-plasticity product of 28.8 GPa%. The micro-cutting mechanism of pin-on-disc wear leads to serious weight loss. The RA with poor mechanical stability accelerates the stress-induced martensite transformation, while internal stress support due to volume expansion reduces the penetration depth of abrasive particles. The weight loss in impact wear is primarily caused by shedding due to fatigue failure. With the increase of RA content and mechanical stability, the persistent stress-induced martensite transformation effectively hinders micro-crack propagation, thereby enhancing impact wear resistance.

Keywords

• Nano-bainite
• Austempering
• Microstructure
• Mechanical property
• Wear resistance
• Retained austenite