DESIGN AND EXPERIMENTS FOR SHOVEL-FINGER AND CYLINDER PEANUT-PICKING DEVICE

Abstract

ABSTRACT Two-stage harvesting is the main method for performing the mechanized harvesting of peanuts, and the picking device is a core part of the combined harvester in China. In order to solve the problem of pod loss caused by the "stacking", "impact" and "throwing up" of peanut plants by a traditional cam-slide spring-finger cylinder picking device, the shovel-finger and cylinder peanut-picking device was developed and used in a picking-up performance test based on the study of peanut-plant strip-picking characteristics. The mathematical model of the mechanism was established by analyzing the structure of the mechanism and the peanut-plant strip-picking characteristics, and the parameters of the mechanism were optimized using the objective function method. The prototype was developed and tested. The experiments in which the prototype was used to collect peanut plants indicated that the phenomenon of peanut plants being stacked and thrown disappeared. Through a response surface analysis and prototype test, the optimal working parameters of the picking device were obtained: the forward speed V was 48.0 m/minute, the rotational speed N was 45.3 r/minute and the ground height H was -18 mm. The peanut-plant picking rate was 98.9% and the fruit loss rate was 2.8% under two different harvesting conditions for which the peanut-plant moisture content was 15~17%.

Keywords

• peanut plant
• shovel finger
• picking mechanism
• optimization design