Impact of the Operation of a Tri-band Hydraulic Compactor on the Technical Condition of a Residential Building

Abstract

The study investigates the surface vibrations generated by a new generation, tri-band hydraulic compactor type V8 from Maschinentechnik Schrode AG (MTS), and a reversible plate compactor type DPU 6055 from Wacker Neuson in close proximity to a low-rise residential building. Compaction works were carried out in three stages, at distances: 15 m, 10 m, and 5 m from the building, and at three depths: 0.4 m, 1.2 m, and 1.8–2.0 m. The research was conducted at one measurement point, located on the outer foundation wall of the building, and at three measurement points located on the ground at distances of 1.25–7.5 m from the building. The study analyses the distribution of peak component particle accelerations at the ground, and peak component particle velocities at the foundation wall of the building as a function of the distance of compactors from the building and the depth of compaction works, as well as the mode of work of hydraulic compactor type V8 from MTS. The study contains the comparison of the permissible vibration levels that are recommended by selected European standards (DIN, BS, VSS, and PL) and an approximate assessment of the impact of vibrations on the technical condition of the residential building.

Keywords

• soil compaction
• hydraulic compactor
• vibrating plate compactor
• ground-borne vibrations
• vibration assessment