Recycling (Mar 2023)
Identifying Optimal Precursors for Geopolymer Composite Mix Design for Different Regional Settings: A Multi-Objective Optimization Study
Abstract
Global objectives to mitigate climate change in the construction industry have led to increasing geopolymer development as an alternative to carbon-intensive cement. Geopolymers can have similar mechanical properties and a lower carbon footprint. However, geopolymer production is not as homogeneous as cement because it is produced by synthesizing alkali solutions with different aluminosilicate precursors. This study assessed the feasibility of using conventional (fly ash, blast furnace slag, and metakaolin) and alternative precursors (steel slag, mine tailings, glass waste, sewage sludge ashes, and municipal solid waste incineration bottom ashes (MSWI BA)) in geopolymer mixes for different European regions (Belgium and Finland) from a sustainability perspective, using environmental, economic, and resource availability indicators as the criteria. A multi-objective optimization technique was applied to identify optimal precursors for geopolymer mixes using two scenarios: (1) considering both conventional and alternative precursors; (2) only considering alternative precursors. The results from the first scenario show that one of the most optimal precursor combinations for the geopolymer mix is 50% fly ash, 25% MSWI BA, and 25% sewage sludge ash for Belgium. For Finland, it is 19% fly ash, 27% mine tailings, and 45% MSWI BA. For the second scenario, one of the most optimal precursor combinations for Belgium is 87% MSWI BA and 13% steel slag. For Finland, it is 25% mine tailings and 75% MSWI BA. Subsequently, linear regression analysis was applied to predict the compressive strength of the identified optimal mixes, and the results for Belgium and Finland were between 31–55 MPa and 31–50 MPa for the first scenario and between 50–59 MPa and 50–55 Mpa for the second scenario, respectively.
Keywords
